Curcumin 95% CAS 458-37-7 | Curcuminoids from Turmeric Rhizome – Baisifu
What the compound is
Curcumin (CAS 458-37-7) is the principal curcuminoid of the rhizome of Curcuma longa L. The commercial 95 percent grade is not a single substance but a defined mixture: curcumin together with demethoxycurcumin and bisdemethoxycurcumin, the three making up the curcuminoid content that is declared on the label.
Baisifu supplies curcumin 95 percent as a standard powder and as a water-dispersible grade. The distinction matters in practice: standard curcumin is lipophilic and disperses poorly in aqueous systems, so beverage and sachet applications usually need the dispersible version rather than a higher dose of the standard powder.
Grades we supply
- Curcumin 95 percent, standard — orange-yellow crystalline powder, the grade used in capsules, tablets and oil-based systems.
- Curcumin 95 percent, water-dispersible — a formulated grade that wets out and stays suspended in aqueous matrices; declare the carrier on the label as required in your market.
- Curcuminoids 70 percent and 95 percent — intermediate grades for cost-sensitive formulas and for blends where curcumin is not the lead ingredient.
- Granular and micronised versions — for dust control on high-speed filling lines and for uniformity in dry mixes.
Production and origin
Dried turmeric rhizome is sourced from established growing regions in India and Southeast Asia, ground and extracted with food-grade ethanol. The extract is concentrated, the curcuminoids crystallised and the crystal mass washed and dried. The three curcuminoids occur together in the plant and are not separated for the 95 percent grade — the specification declares the total curcuminoid content and the individual distribution.
Each lot carries a Statement of Origin for the rhizome and records the extraction and drying site on the TDS. Where a buyer needs the agricultural origin separated from the processing site for a market dossier, both statements can be supplied.
Identity and assay
Identity is confirmed by HPLC retention time against a curcumin reference standard and by UV-VIS spectrum. Total curcuminoids are determined by HPLC at 425 nm, calculated on the dried basis, with the individual curcumin, demethoxycurcumin and bisdemethoxycurcumin peaks reported separately on the COA.
Typical release specification for the 95 percent grade:
- Appearance: orange-yellow, free-flowing crystalline powder
- Total curcuminoids (HPLC, dry basis): 95.0 percent minimum
- Curcumin: typically 70 to 80 percent of the total; demethoxycurcumin 15 to 20 percent; bisdemethoxycurcumin 2 to 5 percent
- Loss on drying: 2.0 percent maximum
- Particle size: 95 percent through 80 mesh
- Heavy metals: lead 3 ppm maximum, arsenic 2 ppm maximum, cadmium 1 ppm maximum, mercury 0.1 ppm maximum
- Residual solvents: ethanol within ICH Q3C limits
- Microbiology: total plate count 1,000 cfu/g maximum, yeast and mould 100 cfu/g maximum, E. coli and Salmonella absent
Applications
Curcumin is used in joint and mobility supplements, antioxidant blends, beauty-from-within capsules and functional beverages. Use levels in finished products typically run from 100 mg to 500 mg of curcuminoids per day, and the label claim usually quotes the curcuminoid figure rather than the extract weight.
Two practical notes for formulators: curcumin stains equipment and clothing readily, so line cleaning procedures need to account for it; and in aqueous systems the dispersible grade is almost always required to avoid sedimentation over shelf life.
Packing, MOQ and lead time
- Packing: 25 kg net in a fiber drum with double polyethylene liner; 1 kg and 5 kg foil bags for samples
- MOQ: 1 kg for sample and development; 25 kg for commercial orders
- Lead time: 3 to 7 working days for stock grades; longer for dispersible and micronised specifications, confirmed at quotation
- Shipping: ex-Xi’an, air or sea, with export documentation prepared on request
Documentation and compliance
Every shipment includes a lot-specific COA, TDS, SDS for the destination market, Statement of Origin and non-GMO statement. Allergen statements are issued on request; for the dispersible grade the carrier is declared so that the buyer can check it against their own labelling and allergen obligations.
The material is a botanical ingredient for further manufacture, not a finished consumer product and not a pharmaceutical. Buyers are responsible for confirming the regulatory status of the finished formulation in their market, including permitted use levels and any claim restrictions applicable to curcumin and to Curcuma longa.
Related extracts
Curcumin is frequently paired with resveratrol in antioxidant formulas and with hyaluronic acid in beauty-from-within products. The wider cosmetic and beauty range sits under women’s beauty and cosmetic extracts.
Need specifications, COA, or a wholesale quote? Contact Us — typical response within 24 hours.
