Milk Thistle Extract CAS 84604-20-6 | 80% Silymarin – Baisifu
What the compound is
Milk thistle extract (CAS 84604-20-6) is a concentrate of the seed of Silybum marianum (L.) Gaertn., standardised on silymarin, a group of flavonolignans of which silybin is the principal component. Silymarin itself is commonly referenced as CAS 65666-07-1.
The 80 percent silymarin grade is the workhorse specification in liver-support supplements. Two assay bases circulate in the trade and they are not interchangeable: silymarin by UV, and silybin by HPLC. A supplier quoting 80 percent without naming the method is telling you very little, so every Baisifu COA states both the method and the result.
Grades we supply
- 80 percent silymarin (UV) — the standard grade for capsules and tablets.
- 80 percent silymarin with 30 percent silybin (HPLC) — the grade specified by buyers who need a defined silybin figure for their label claim.
- Silymarin 50 percent and 70 percent — for cost-driven formulas and for blends.
- Water-dispersible grade — for sachet and beverage applications where the standard powder would settle out.
Production and origin
Seed is sourced from established growing regions, cleaned and defatted before extraction with food-grade acetone or ethyl acetate. The extract is concentrated, purified and spray-dried to a free-flowing powder. Defatting before extraction matters: residual seed oil shortens shelf life and causes caking, so the oil content is controlled and reported.
Each lot carries a Statement of Origin for the seed, and the extraction and drying site is recorded on the TDS.
Identity and assay
Identity is confirmed by TLC fingerprint against a silymarin reference and by HPLC profile of the flavonolignan group. Total silymarin is determined by UV spectrophotometry at 288 nm and silybin by HPLC, both calculated on the dried basis.
Typical release specification for the 80 percent grade:
- Appearance: light yellow to light brown, free-flowing powder
- Total silymarin (UV, dry basis): 80.0 percent minimum
- Silybin (HPLC, dry basis): 30.0 percent minimum on the specified grade
- Loss on drying: 5.0 percent maximum
- Particle size: 95 percent through 80 mesh
- Heavy metals: lead 3 ppm maximum, arsenic 2 ppm maximum, cadmium 1 ppm maximum, mercury 0.1 ppm maximum
- Residual solvents: acetone or ethyl acetate within ICH Q3C limits, reported per lot
- Microbiology: total plate count 3,000 cfu/g maximum, yeast and mould 300 cfu/g maximum, E. coli and Salmonella absent
Applications
Milk thistle is used in liver-support supplements, detox and cleanse formulas, and increasingly in hangover and metabolic products. Use levels in finished products are typically 150 mg to 500 mg of extract per day, expressed against the silymarin content rather than the raw extract weight.
In tablets the 80 percent grade compresses well at standard pressures. In hard capsules the powder flows cleanly if the oil content is controlled, which is why the defatting step is specified.
Packing, MOQ and lead time
- Packing: 25 kg net in a fiber drum with double polyethylene liner; 1 kg and 5 kg foil bags for samples
- MOQ: 1 kg for sample and development; 25 kg for commercial orders
- Lead time: 3 to 7 working days for stock grades from confirmed order
- Shipping: ex-Xi’an, air or sea, export documents prepared on request
Documentation and compliance
Each shipment carries a lot-specific COA stating both assay methods, a TDS, an SDS for the destination market, a Statement of Origin and a non-GMO statement. Allergen and BSE/TSE statements are issued on request.
The extract is a botanical ingredient for further manufacture and is not a pharmaceutical. Buyers are responsible for confirming the regulatory status of the finished formulation in their market, including permitted use levels and any claim restrictions applying to Silybum marianum.
Related extracts
Milk thistle is often combined with alpha-lipoic acid and glutathione in liver and antioxidant formulas. Both are held as standard grades and can ship in the same consignment.
Need specifications, COA, or a wholesale quote? Contact Us — typical response within 24 hours.
